NETBIOS Hacking- The Ethical Hacking

Welcome to hackers world!!!!!

Hi friends, today I am going to tell you how to hack Remote computer with Netbios. And access to its Hard Disk or Printer. NETBIOS hack is the easiest way to break into a remote computer.
STEP-BY-STEP NETBIOS HACKING PROCEDURE
1. Open command prompt
2. In the command prompt use the “net view” command without qotes.

Example: C :> net view \60.50.32.221
The above is an example for operation using command prompt.”Net view” is one of the netbios command to view the shared resources of the remote computer.Here “60.50.32.221? is an IP address of remote computer that is to be hacked through Netbios.You have to substitute a valid IP address in it’s place.If succeeded a list of HARD-DISK DRIVES & PRINTERS are shown.If not an error message is displayed. So repeat the procedure 2 with a different IP address.
3. After succeeding, use the “net use” command in the command prompt.The “net use” is another netbios command which makes it possible to hack remote drives or printers.
Example-1:
C:>net use D: \60.50.32.221F
Example-2:
C:>net use G: \60.50.32.221SharedDocs
Example-3:
C:>net use I: \60.50.32.221Myprint

NOTE: In Examples 1,2 & 3, D:,G: & I: are the Network Drive Names that are to be created on your computer to access remote computer’s hard-disk.
NOTE: GIVE DRIVE NAMES THAT ARE NOT USED BY ANY OTHER DRIVES INCLUDING HARD-DISK DRIVES, FLOPPY DRIVES AND ROM-DRIVES ON YOUR COMPUTER.THAT IS IF YOU HAVE C: & D: AS HARD DIRVES, A: AS FLOPPY DIVE AND E: AS CD-DRIVE, GIVE F: AS YOUR SHARED DRIVE IN THE COMMAND PROMPT
F:,”SharedDocs” are the names of remote computer’s hard-disk’s drives that you want to hack. “Myprint” is the name of remote computer’s printer.These is displayed after giving “net use” command. “60.50.32.221? is the IP address of remote computer that you want to hack.
4. After succeeding your computer will give a message that “The command completed successfully“. Once you get the above message you are only one step away from hacking the computer.
Now open “My Computer” you will see a new “Hard-Disk drive”(Shared) with the specified name.You can open it and access remote computer’s Hard-Drive.You can copy files,music,folders etc. from victim’s hard-drive.You can delete/modify data on victim’s hard-drive only if WRITE-ACCESS is enabled on victim’s system.You can access filesfolders quickly through “Command Prompt”.
NOTE: If Remote Computer’s Firewall Is Enabled Your Computer Will Not Succeed In Gaining Access To Remote Computer Through Netbios.That is Netbios Hacking Is Not Possible In This Situation.(An Error Message Is Displayed).So Repeat The Procedure 2,3 With Different IP Address.
Thanks for Reading this article. Hope you will like……..

Be a good Hacker and Save the Nation!!!!!
Thanks & Regards
Tarun Arora
Tarora89@gmail.com